Skip to content

How To Make A Skateboard

    Making a skateboard is more accessible than most people imagine. The deck, also known as a wooden board, requires only the basics of carpentry, a jigsaw, the skateboard mold, and a vacuum press; however, they can also be built at home with some patience. While professional-looking boards are easier to construct with professional equipment, anybody can make a skateboard and ride it in a couple of days of effort.

    What do you need to construct your skateboard?

    • Grip tape
      1 Razorblade or a crafting knife
    • Skateboard Hardware kit (8 bolts and nuts)
    • 1 Skate Tool
    • 1 Skateboard deck
    • 2 trucks (includes necessary hardware)
    • 4 Wheels
    • Spacers for 4 bearings
    • 8 Bearings

    How do you put together your skateboard?

    • Attach the grip tape to the deck’s top. Make sure that you press the video until it’s flat on the entire deck. Cut off any excess tape with the razor.
    • Make holes in your tape. Flip your board upside down, then use bolts in the hardware kit to make holes into the video.
    • Make sure the truck is secured. Place them on your board, with the kingpins facing each other. Secure them to the board using bolts. Use skating tools to ensure the nuts.
    • Make sure you have your bearings installed. Every wheel requires two approaches to spin correctly. Place a path on the other side of the wheel until you feel it snap into position. Place a spacer for bearings inside the revolution that doesn’t contain a way, then place an approach on the open side. Repeat this process for all four wheels.
    • Install your wheels. Utilizing the hardware included in your truck, you can place an axle with a washer, followed by a spin and then another washer. Fix it in place with the nuts. Repeat this process for all four wheels.

    What is the cost of building the skateboard deck?

    The average price for the skateboard is $160 to $170. The deck and the trucks are the most expensive components that make up the board. If you want a lower-cost setup, plan for a minimum budget of $64 to construct a skateboard from scratch. Select a deck for your skateboard carefully to get the most performance from your board.

    How do you think a skateboard should last?

    Regular deck replacement may be necessary if you’re obsessed with skating. Replace the deck every 2 to 3 months. It depends on the type and type of deck you choose.

    Making skateboards is easy, provided you follow the correct instructions and use the materials and tools required for the job. If you stick to these steps, the entire procedure will be enjoyable. When you have your board ready then, you can begin the process of learning. However, make sure you have all the equipment.


    Skateboarding does not have to make you invest money in this or this. Sometimes, you must be creative, resourceful, and persevering. When you do this, you’ll discover that your abilities can offset some expenses.

    And now you’ve figured out how to create the skateboard using plywood, making skateboards using other materials, like cardboard, shouldn’t be that difficult. Keep your eyes on the essential steps to perform the job correctly.

    Leave a Reply

    Your email address will not be published. Required fields are marked *