There’s not much as confusing and enthralling as confronted with a brand new product you’re unsure what to do with. In the case of vinyl flooring, working out what you can put on the floor might cause you to be a bit confused. What are the options for Vinyl plank flooring?
When it comes to cleaning vinyl plank flooring, you can use a range of cleaning products like Pine-Sol Goo Gone Goof Off Clorox wipes, Clorox Bleach and bleach diluted as well as essential oils as well as vinegar and water Fabuloso and even an Eraser Magic.
Pine-Sol is a well-known multi-surface cleaner because of its capacity to remove dirt and germs. It is also suggested for use on water-resistant, hard surfaces. However, is it possible to apply Pine-Sol to clean vinyl flooring safely?
What is Pine-Sol?
The Pine-Sol multi-purpose cleaner agent works as a disinfectant and cleaner. The Clorox company is the owner of the product. Since its first appearance in 1929, the multi-surface cleaner has been one of the top cleaning products of many and is available in several different products. What’s more, is that it creates a fresh smell on the surface that is cleaned. Based on the scent one prefers, there are the original Pine-Solscent, Lavender new, Lemon fresh, and Sparkling wave options. This cleaning product is ideal for cleaning hard and nonporous surfaces. The main ingredient in Pine Sol is glycolic acid which provides the cleaner with beneficial microbial properties.
Additionally, it contains alcohol ethoxylates as well as Propylheptylethers. They are responsible for removing or loosening the oil or dirt-based residues left behind on the flooring. Let’s look at how Pine-Sol can be used to clean flooring made of vinyl planks.
How to Clean Vinyl Floors With Pine-Sol
Based on the area of your vinyl flooring, they may be exposed to spills many times throughout the day. It is possible to spot clean food particles, dirt, and grime with water and use a washcloth or paper towel. You can break open the Pine-Sol every two weeks to wash the floor better.
Follow the steps listed below to scrub your vinyl floors using Pine-Sol:
Eliminate dirt on the surface.
Cleaning the floor with a broom without getting rid of dust and dirt can cause harm. The abrasive grime could scratch the floor when you scrub. Therefore, you should remove the debris using the help of a vacuum cleaner or dry mop first.
Mix the ingredients to make the perfect solution.
Place the contents of one-gallon water along with a one-quarter cupful of pine-sol in a bucket of a large size. A little agitation is needed to mix it. Be careful not to use too much of your cleaning products. If you apply the product excessively, your floors might get sticky.
Make sure you are mopping.
The mop should be dipped into the water bucket and then into the Pine-Sol. It’s crucial to wring it as much as possible before placing it on the floor. If you apply excessive water, it may get into the cracks in vinyl planks and harm the flooring underneath.
Rinse thoroughly with clean water.
To avoid buildup, you must follow the cleaning with a fresh wash. Clean the mop and bucket using fresh water. Then, scrub the floor with only water. Make sure you don’t leave any water or puddles. Drying your foot using a soft towel can prevent water from leaking into the cracks and decrease the possibility of falling.
Can You Use Lysol on Vinyl Plank Flooring?
Lysol might be the first thing you imagine when you think of removing germs from your countertops and doorknobs. Still, this brand is a great multi-purpose cleaner that can be utilized on almost every material in your home, even your vinyl flooring. This product is simple, quick to use, and highly efficient in cleansing and disinfecting. Spray the cleaner, allow it to sit for a few seconds, and wipe away dirt and dirt in just a few minutes!
Will Pine Sol damage vinyl floors?
Recommended Cleaning Products for Vinyl Flooring Don’t apply “mop and wax” cleaners on your flooring. Cleaning products designed specifically for flooring explicitly made for vinyl include the ones made by Pine Sol, Pledge, and Armstrong. You can make your floor cleaner for vinyl at home. Dirt can be removed using a gallon of hot water and apple cider vinegar.
How to Prevent Damage to Vinyl Flooring
The first step in keeping your vinyl flooring clear is to reduce dirt, stains and scratches before they happen. As time passes, dust and dirt can reduce the surface of any flooring, which includes laminate or vinyl tile, so it’s always an ideal idea to put a high-quality, durable doormat or rug in the doorways so that grime and grit don’t move into the home.
Another suggestion is to use a sheet of plywood or paneling every when you move furniture across the floor. This can prevent scuff damage or tear in the fabric. It is also possible to put vinyl coasters under your furniture’s legs and feet to protect against permanent indentation.
Conclusion
You’ll need to follow the step-by-step instructions I’ve provided to keep your vinyl plank floor neat.
Pine Sol is chiefly made to keep your home clean. Your home.
To get rid of the sticky material off the surface, make use of a microfiber cloth.
If you have vinyl plank flooring or not, you can apply it too sticky dirt and oil.
I’m hoping you find the solution to your issue. Can you apply Pine Sol on vinyl plank flooring?